Engraving Forum.com - The Internet's Largest and Fastest Growing Engraving Community

The Internet's Largest and Fastest Growing Engraving Community
Discuss hand engraving using basic to the most advanced methods and equipment
Forum Members: 14,761. Welcome to our newest member, AnicaLin
EngravingForum.com - Domain since Feb 7, 2003

Graver Video Conferencing is empty Join now!


Go Back   Engraving Forum.com - The Internet's Largest and Fastest Growing Engraving Community > Forums > AirGraver Networking - Hand Engraving Forum
ENGRAVING TOOLS - Paypal accepted Classes Glossary Feedback Tips Sharpening Bulino Videos Forum Policies

Reply
 
Thread Tools
  #1  
Old 06-05-2021, 09:54 AM
Rob Meixner Rob Meixner is offline
Steel
 
Join Date: Feb 2018
Location: Jordan, NY
Posts: 19
Default Compressor Noise Levels

My current air compressor is a Dewalt nail gun NL type compressor. I just measured the dB level with a phone app and it runs at 74 dB on the cement floor of my shop. It is fairly large. I am thinking of buying a smaller model 1P 1060s or P from California Air that claims 56 dB. Will this be a real improvement? I can't tell as I am deaf, but others I live with hope it will be. Thanks...Rob
Reply With Quote
  #2  
Old 06-05-2021, 11:44 AM
bildio bildio is offline
Gold
 
Join Date: Dec 2010
Location: MD
Posts: 156
Default Re: Compressor Noise Levels

Here's a review I posted on Amazon back in 2018. I think the 1060S will be an improvement over what you have now. Although I was disappointed with the noise level, it has a "dull" sound which makes it less offensive. If it wasn't described as ultra-quiet, I may have been more accepting of its noise level.

"I purchased the California Air Tools 2010A to replace a SilentAire SuperSilent 20A compressor. The 20A is a very nice, quiet compressor, but I was concerned about introducing oil into the air hose even though it has a couple of in-line filters. The noise level of the 2010A surprised me, i.e., it is much louder than I expected. Aside from the noise level, I'm satisfied with it. Anyway, I subsequently purchased a California Air Tools 1P1060S to see if it met my noise level expectations. Although, it is quieter than the 2010A, I still consider it too noisy.
I took some measurements using a sound meter app on my cell phone. Measurements were taken with the phone three feet away from the compressor. I think California Air Tools takes measurements at a greater distance, but I don't know what distance they use.
- 20A spec is 30 dB. I measured 33 dB
- 1P1060S spec is 56 dB. I measured 61 dB
- 2010A spec is 60 dB. I measured 70 dB
- Sears Craftsman 1.5 hp measured 71 dB"
__________________
Bill

Last edited by bildio; 06-06-2021 at 08:42 AM.
Reply With Quote
  #3  
Old 06-05-2021, 12:30 PM
Rob Meixner Rob Meixner is offline
Steel
 
Join Date: Feb 2018
Location: Jordan, NY
Posts: 19
Default Re: Compressor Noise Levels

Sounds like we live with it nd ise the money to order some additional templates from Steve. Thanks...Rob
Reply With Quote
  #4  
Old 06-05-2021, 12:45 PM
-Daniel- -Daniel- is offline
Steel
 
Join Date: Dec 2018
Location: Germany
Posts: 54
Default Re: Compressor Noise Levels

I use a SilAir 50/24 and that compressor is around 40db. Compared to other compressors it is very quiet. If it runs it is possible to talk to each other without much effort. Persons in a room next to you should not be bothered by the sound it makes. My airgraver is louder than the running compressor, thats for sure.

In my homeoffice workshop i have a SilAir 20A and that compressor is just a silent swirling sound as long as it runs. Not much more than the noise a running fridge does. And it delivers enough preassure to work with the airgraver.
Reply With Quote
  #5  
Old 06-06-2021, 04:25 AM
chujybear chujybear is offline
Platinum
 
Join Date: Jul 2009
Posts: 740
Default Re: Compressor Noise Levels

I run a jun air and a panther (they are the same guy). More or less the sound of a fridge
Reply With Quote
  #6  
Old 06-08-2021, 03:05 PM
MoldyJim MoldyJim is offline
Gold
 
Join Date: Oct 2015
Location: United States
Posts: 174
Default Re: Compressor Noise Levels

I bought one of the Two gallon Fortress brand compressors from Harbor Freight, Yeah, I know...
Anyway it is pretty damn quiet. Very comfortable noise level.
Even in a small upstairs room it isn't audible downstairs.

On sale it was $139 I believe. Hopefully it will last for a while. They supposedly have a good reputation.

While it isn't big enough to run a rotary tool, for a Classic it works great.

Last edited by MoldyJim; 06-09-2021 at 02:46 PM. Reason: ! gallon should be two gallon.
Reply With Quote
  #7  
Old 07-17-2021, 08:15 AM
Rob Meixner Rob Meixner is offline
Steel
 
Join Date: Feb 2018
Location: Jordan, NY
Posts: 19
Default Re: Compressor Noise Levels

Now that I have all the leaks closed, my compressor doesn't come on very often. Still the same noise level, just no as frequently. Down the road I will buy an engraving comressor because I need the one I currently use for other purposes and it is big for the bench that I have built.
Reply With Quote
  #8  
Old 07-27-2021, 07:35 AM
jldj jldj is offline
Steel
 
Join Date: Feb 2009
Location: Newnan, Ga
Posts: 56
Default Re: Compressor Noise Levels

Hulk makes quiet compressors. Their not as expensive as most of the super quiet compressors averaging between 3 and 4 hundred. One of theirs runs at 37db with the average being 40db. I have a small one in my store and it's pretty quiet.
Reply With Quote
Reply

Bookmarks

Thread Tools

Posting Conduct
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -6. The time now is 12:18 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.