AirGraver Networking

[Steve Lindsay]

The purpose this networking section is to help those with an AirGraver that are willing to take time to help those wanting to see or try either a Foot Control AirGraver or PalmControl AirGraver.

If you are interested in seeing what all the fuss concerning the comparison of AirGravers to other engraving tools then post your interest and location in a thread in this networking area. Please don't give your house number or street address on the forum. You can do that in a private message later once someone contacts you.

The same goes for owners of AirGravers. If you're willing to take the time to show your foot control AirGraver or PalmControl to someone, you can post your city and state location.

So perhaps new threads and posts would be titled something like:
For those that have AirGravers:
PalmControl in Las Vegas, Nevada
Or
Classic Foot pedal in Seattle, Washington
Or, For someone that wants to try one:
York, Pennsylvania, I want to see what the fuss is about

[Daniel Houwer]

Palm Controle and Footcontrole in Haarlem, Holland, Europe.

[jack]

I will be happy to show the Palm Control Classic and the Palm Control Chasing,( yes there is a chasing palm control ,sort of a one of a kind ) plus both can be a foot control. Billings,Mt

[Steve Lindsay]

Great! Thank you guys!

Maybe doen't matter but I was thinking to start a new thread for each one. If you could, repost and make a new thread for each one. You can just make a copy of what you've already typed. This link should take you directly to a new thread post.
http://www.handengravingforum.com/ne...newthread&f=17

Thanks again!
Steve

[hadley perdue]

I am a beginning engraver, and I very much appreciate the opportunity to interact with and learn from those of you who are much further along than I am regarding the art and skill of engraving.

[MikeDubber]

This is an open invitation for anyone in my area - or anyone who happens to be passing through - to stop by my training studio to see and use the Lindsay Classic and PalmControl tools. There are some very good reasons for anyone who is just starting out (or those who might be considering engraving equipment upgrades) to see and use these tools.

I'm located in Evansville, Indiana at the Southern end of the State. My Training Studio is fully equipped and I'll be happy to offer anyone a measure of my time and advice before you commit to a purchasing any brand of engraving equipment.

Mike Dubber
11 South Green River Road
Evansville, IN 477115
e-mail mwdub@aol.com
Cell 812-454-0271

[Steve Lindsay]

Originally Posted by hadley perdue

I am a beginning engraver, and I very much appreciate the opportunity to interact with and learn from those of you who are much further along than I am regarding the art and skill of engraving.

Welcome Hadley :seeya:


Steve

[Steve Lindsay]

For the locations posts be sure to make new threads. Follow this link and you can see them location threads there. http://www.handengravingforum.com/forumdisplay.php?f=17 Look for the "New Thread" button once you are there to make the posts for that.

Thanks again everyone
Steve

[Jim Orto]

Loveland, Ohio. I would like to learn. I am completely new to engraving and forums. Anybody near Cincinnati Ohio that has a PC or other tools to show me and get me off on the right foot? I am really starting at point zero, this is my first post to any forum and when I tried to post to networking as a new thread, I kept getting bounced out of the forum. Thanks for your help. Jim

[JJ Roberts]

Jim, Carl Bleile lives in Ohio he may help you,he is a talented engraver. listed under schools. J.J.

[Jim Orto]

Thanks JJ. Jim

[bubbas55]

i am just getting started and would love to meet and see the work and tools of anyone in my area. i am in nineveh, in, about 40 miles south of indianapolis in brown county.

[jack]

I wish I could do that Steve but I haven't had a new thread button for a very long time. Jack

[Steve Lindsay]

Hi Jack, Here is how to start a new thread:

Go to the main section of the forum. Here is a link to it:
www.engravingforum.com/forumdisplay.php?f=2

Click on the "new thread button"
It is on the left side of the screen.

Write your post and when you finish click the button that says:
"Submit New Thread"

[Humble Designs]

I am a stone carver and looking to make the leap to metal and thinking seriously about going straight to the palm control airgraver... I'm in Saskatoon, Saskatchewan, Canada... anybody around here or in Alberta using airgravers? Closest I see so far is Montana Thanks!

[Dean]

Just wanted to say a BIG thank you to Bill Moody for his great hospitality Sunday in having me over. It was wonderful to meet your wife and her friend and enjoyed a relaxing lunch and fellowship. Then for you to allow me to actually use your Lindsay graver was so cool, I was surprised at how small and comfortable it was and WOW I engraved something..... At least now I know the direction I need to go in from here. Bill I can't thank you enough for all the insight, information and help you provide me as well as a new friendship.
Dean

[Big-Un]

You are quite welcome Dean. The pleasure was all mine, and, as I said during our talk, Steve is ever the gentleman and will work with you for whatever you may need, be it guidance, information or instruction. I continually review his videos to catch up on the parts I missed or just to review his techniques. I too am thankful for a new friendship and look forward to more visits together.

As a totally new beginner, I must let everyone know that Dean exhibited great potential as an engraver. He showed me he is very capable of learning quickly and has picked up on what to look for in design and execution already. I look forward to seeing his progress in the craft.

Bill