Engraving Forum.com - The Internet's Largest and Fastest Growing Engraving Community

The Internet's Largest and Fastest Growing Engraving Community
Discuss hand engraving using basic to the most advanced methods and equipment
Forum Members: 14,761. Welcome to our newest member, Bruno
EngravingForum.com - Domain since Feb 7, 2003

Graver Video Conferencing is empty Join now!


Go Back   Engraving Forum.com - The Internet's Largest and Fastest Growing Engraving Community > Forums > Lindsay AirGraver Info - Hand Engraving Forum
ENGRAVING TOOLS - Paypal accepted Classes Glossary Feedback Tips Sharpening Bulino Videos Forum Policies

Reply
 
Thread Tools
  #1  
Old 05-31-2017, 10:06 PM
Steve Lindsay's Avatar
Steve Lindsay Steve Lindsay is offline
Administrator
 
Join Date: Feb 2006
Location: Kearney, NE
Posts: 4,555
Default Fast Resharpening Video

Click the arrow in middle of the image to start the video


Fast resharpening -- After initial sharpening of a graver blank only use the large template to touch up a broken or dull point. In other words, the small template is not needed or used for resharpening. The small template in the set is only for initially tapering and shaping a new graver blank. On my bench I only keep a 3000 diamond bench stone for touching up points. You can touch up that same graver point for years that way. I have a TW-Design high speed power hone in the other room with a rough lap on it for initially shaping a new blank, but from then on it is maintained with the 3000 diamond bench stone. Graver sharpener info page: www.AirGraver.com/sharpening.htm
__________________
__________________________________
Steve Lindsay
AirGraver.com
EngravingArtist.com
Reply With Quote
  #2  
Old 06-01-2017, 05:55 AM
JJ Roberts's Avatar
JJ Roberts JJ Roberts is offline
Platinum
 
Join Date: Apr 2006
Location: Northern Virginia
Posts: 2,070
Default Re: Fast Resharpening

Steve,Were did you get that green band that's on your graver?good idea. J.J.
Reply With Quote
  #3  
Old 06-01-2017, 06:44 AM
pmace pmace is offline
Steel
 
Join Date: Nov 2010
Location: Arizona City, AZ
Posts: 68
Default Re: Fast Resharpening

Duh, I never thought to use the plastic bands to set the length. Good idea! Setting the length sticking out is the only drawback to the template system I see and that solves it. Add that to the instructions for the template system so us mortals know the secret.
Reply With Quote
  #4  
Old 06-01-2017, 10:29 AM
Steve Lindsay's Avatar
Steve Lindsay Steve Lindsay is offline
Administrator
 
Join Date: Feb 2006
Location: Kearney, NE
Posts: 4,555
Default Re: Fast Resharpening

Colored graver beads are good for several uses. Use them to help identify your gravers. Also set them at the proper distance for resharpening in the template sharper. Use the length gauge that comes with the sharpener to help you place the bead in the correct location on the graver. The beads are on the AirGraver site. They are free when placing an order with something else on the site. During checkout just write a note that you would like a bag.





__________________
__________________________________
Steve Lindsay
AirGraver.com
EngravingArtist.com
Reply With Quote
  #5  
Old 06-02-2017, 08:43 AM
Big-Un Big-Un is offline
Platinum
 
Join Date: May 2006
Location: Eden, NC
Posts: 624
Default Re: Fast Resharpening

Yep, that's them.
Reply With Quote
  #6  
Old 06-09-2017, 07:50 PM
takedeadaim takedeadaim is offline
Steel
 
Join Date: Feb 2017
Location: Wisconsin
Posts: 91
Default Re: Fast Resharpening

The bands work great for keeping your gravers separated. I "dumb stumbled" over the depth adjustment use, wish I could say I thought it up but I had put it all the way on the graver up near the tool, then went to touch it up and realized it was too far on to go in the sharpening jig. I slid it in so the spacer went on and then realized if I left it there it would be quick to sharpen.
Reply With Quote
Reply

Bookmarks

Thread Tools

Posting Conduct
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -6. The time now is 02:50 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.