[Roger B2]

Well, here is a start. I don't don't take any credit or blame for these combinations as they are reproduced as found elsewhere. I'll only include those where Epson transparencies are not used as the media and where a blank line exists it is because the information was not provided.

1) Printer
2) Ink
3) Media
4) Transfer solution
5) Notes
6) Donor

1) HP Photosmart C3130
2) Vivera #92
3) Photoworks
4)
5)
6) Fancygun

1) HP F380
2) #21 Black
3) 3M transparencies PP2500
4)
5) Set to greyscale. Let ink dry at least 1/2 hour
6) Maplesm

1) HP 5440
2) #92 Black
3) Parchment or 3M Laser transparencies
4)
5)
6) Monk

1) HP Officejet 6213
2) HP #131
3) Mylar or "Highland" transparencies
4)
5) Spray sheet with dry type of deodorant on coarse side of trans.
Prepare metal with chinese white or white Sharpie
6) Van Knife

1) HP 1400 series
2) HP #27 Black
3) Mylar or "Highland" transparencies
4)
5) As above
6) Van Knife

1) Epson CX4900
2) Epson #73 Black
3) Nobo transparencies
4) Damar diluted with lighter fluid (proportions not specific but can be
around 50/50. Wait to dry - about 3 minutes.
5) Make sure metal is cleaned with acetone
6) Roger B

There other printer/ink combinations but it seems rather pointless posting them as they work with Epson transparencies.

All the best,
Roger