View Single Post
Old 05-27-2010, 09:58 AM
aikisan aikisan is offline
Join Date: May 2010
Location: germany
Posts: 1
Default Re: Lasercopy transfer

Originally Posted by Daniel Houwer View Post
This has been told before at least a dozen times.
I just put some pictures to it.

What you need,
Laser copy or laser print. The toner is the magic in this!
Acetone (this was done with nailpolish remover) , brush, scissors, tape and metal sheet.

To use this method, be clean and quick. Do some tests before ! From moistening with nailpolishremover or acetone until revealing the transfer it only takes less then a minute. Work clean and fast.
For smaller transfers a cotton swab or cloth would work very good.
Do test the copier, I had a copier next door that worked a charm. It got replaced and did not work at all. Another copier worked better with denaturalized alcohol and wintergreenoil. Do do some testing!
As I said, its all been said before! So I only hope my picture's help a bit.

Thanks for the tutorial, it helps a lot.
I have used HP4500 Laserprinter, and it works fine.

Reply With Quote