Re: help
Hi Mark,
Mark if you want to engrave car and bikes parts go for the Nitro G 20.OR the Artisan.
If you want to engrave jewellery,knives, guns etc go for the classic depending on your budget either with a foot control or the palm control.
The classic has adjustments for variable stroke.(hammering) and is a versatile airgraver can do most of the the above.
You will need an engraving vise to hold your work.
You will need a sharpening system either the set of benchstones or the power hone with the laps.
And you will need some graver blanks and the following templates :
The v96 - Red
The universal v II6 - Clear
The Flat & Knife combo - Black
And I will recommend a palm push too.(basic to start with)
Any more advise give us a shout.
SE
__________________
Learn from those who know more than you do and teach those who know less than you do. - I.M.
|